Peugeot 308 Key Fob: The Good, The Bad, And The Ugly
Peugeot 308 Key Fob Replacement
Peugeot's 308 is somewhat old-fashioned, but it is still attractive. It might not be the most luxurious car in its class It's a Ford Focus or Volkswagen Golf will help you stay away from road imperfections, but it's a relaxing and comfortable drive.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. No matter if the issue is intermittent or constant these tips will aid.
Water Damage
When you accidentally leave your key fob in a pool or get it wet during kayaking, swimming, canoeing, rafting or canyoning, it's most likely to suffer water damage. Keep your key fob in a dry bag every time you are outdoors or engage in activities that expose it to excessive water.
You'll also want to ensure that the fob is completely dry prior to opening it and reusing it. If you detect any odors from the fob (such as industrial fluid or windshield washer fluid), this is another sign that it has been submerged.
A circuit board that's damp can cause the battery's charge to drop its charge or even explode. If you're able to pull the 308 key fob of the water in which it was stuck in then flip the button side down and shake out as much water as you can before opening the case. Remove the battery, then wipe the circuit board down with a cotton swab that has been dipped in 90-percent alcohol.
Other reasons that your Peugeot 308 remote entry keyless system may not work include a dead battery in the coin-cell or receiver module issues signal interference or a faulty chip. If none of the above are the issue it is possible to reset the system by disconnecting 12 volt battery from your vehicle for 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with remote start technology that allows drivers to start their vehicle from a distance, allowing them to warm up or cool down the car before they enter. This feature is extremely beneficial particularly during the winter's cold and chilly months. But sometimes, the remote stop system stops operating due to a range of reasons, including an unresponsive coin battery.
A coin-shaped battery that is found inside the key fob will last a time of between two and four years, based on how frequently it is used and the location where it was purchased. The date of use will be displayed on the packaging or in the user's manual.
If the key fob stops working after exposure to clean tapwater, take out the battery and clean the electronic chip using the help of a paper towel that has been soaked with isopropyl ethanol. Then, dry the chip thoroughly before replacing it. If the key fob was exposed to soapy or salty water, it may have fried the chip. It is necessary to replace it.
If you're unsure whether the battery is damaged You can test the voltage using a multimeter connected to both the plus and minus terminals. The voltage should be around 12-13 volts, however, if it reads lower, the battery should be replaced. You can also reset the computer in the onboard computer by disconnection and reconnecting the 12 volt batteries in reverse order. (positive cable first then negative cable). The engine should start after this.
Faulty Receiver Module
If you're not getting the "Key Detected" message on your dashboard, then it's possible that your receiver module has been afflicted with a fault. It's the component that sends out a signal when your key fob activates. It also functions as an alarm, and stops the car from starting if it doesn't have the correct key.
This could be due to a number of reasons, including water damage or simply ageing. If the electronic chip in your Peugeot 308 keyfob has been damaged by dirty tap water It could be because the keyfob was exposed to it. In this scenario it is necessary to take the device apart and clean it thoroughly using isopropyl alcohol or an electronic cleaner. Once it's dry, you can put the battery back in and try again.
If the issue persists, it's probably a good idea to see a local Peugeot specialist or locksmith. They'll be able to utilize a diagnostic tool to help pinpoint the issue and fix it.
Losing your Peugeot keys to your car can be an extremely stressful experience. A certified auto locksmith will be able to solve the issue in minutes. They can cut a new key and then program it into your vehicle, ensuring that you're ready to get to the road as quickly as possible. Click here to find the nearest locksmith.
A malfunctioning electronic chip
The electronic chip inside the Peugeot 308 key fob plays a crucial part in the remote control system. If the chip is damaged, you could encounter issues starting your car or receive a message stating "anti-theft". In this instance the only option is to replace the key. Auto locksmiths who are professionals are able to offer the service in the shortest time.
The chip in your Peugeot 308 key fob can become faulty due to water damage, sweat dirt, or other reasons. If your Peugeot 308 key fob has been exposed to soapy water, you should clean it immediately. peugeot 308 key programming can wipe the electronic component using a paper towel soaked in isopropyl Alcohol. Then, you need to allow the battery to completely dry.
Sometimes, a key fob can cease to function due to radio interference. This could be caused by other devices that operate at the same frequency as your Peugeot key fob. It could also be caused by bad weather or objects in the vicinity of the vehicle. If you experience this issue you should visit a Peugeot dealership.
The Peugeot 207/308 Key Fob is delicate and needs particular care. It is not recommended to drop it or throw it around. If you lose it, try to locate it as quickly as possible. You can reset all on-board computers by disconnecting the 12 volt battery for a short period of time. Make sure you disconnect the negative cable first, then the positive.